4/30/2012
4/29/2012
YAMS-130B Guraifa - Scratch Build
Another stunning kit from Modelers-G website. I can't understand Japanese, so I am about to butcher everything by using google to translate it.
Posted by
ju_ustin
0
comments
More after the Jump!
Gundam Age Episode 29!
So the last stretch to this series starts! I am going to watch it more now since more Gundams will come into the picture besides the protagonist's. I can't wait to see the Vagan's Gundam and the other new dark mobile suit.
Posted by
ju_ustin
0
comments
More after the Jump!
Super Robot Taisen Z2 Videos!
Where is my psp?!?
Videos of all the attacks of certain units. Don't say I didn't warn you.
Videos of all the attacks of certain units. Don't say I didn't warn you.
Posted by
ju_ustin
0
comments
More after the Jump!
4/28/2012
Thought I'd try - Decal Warning! - Updated Again
After much internet searching and asking online stores, I have learned that Bandai has stopped the production for the water slide decals for the MG Unicorn Gundam. Im so late to the party...
Since then I have bought two decals one from TatsuHobby that is a 3rd party decal.
Another, in Ebay from china, which is the picture you see to the side.
Now i applied the decals from TatsuHobby and they turn out pretty fine. Just like the Bandai decals they are pretty thick and easy enough to apply. You can move them around easily in to place. The only down side to them is that they do not stick as well as Bandai decals.
Now, for the more serious matters, the ones I bought from Ebay. They are thin and for me are very difficult to apply. Usually you'd be able to move the decal around once you slide them from the sheet to wherever you are applying them. However, with the ones I bought from China, they tend to stick more, and are very difficult to move around since they are super thin. I am currently in the process of trying to make them work, but I am horrible at these kinds of things. Little patience kind of issues for me. Also, i use the Mr. Mark Setter for applying decals and after applying one, it seemed to have melted the decals slightly. I hope that it is just me getting used to these decals that aren't on par with the Bandai or Tatsuhobby-3rd Party decals. So far I really wouldn't recommend buying these decals, but it was what I expected buying something from China.
If anyone has any suggestions please leave a comment! Or if anyone knows any place left to get the actual Bandai brand decal for the MG Unicorn, because I'd rather use those.
-Update-
So after messing around with a few more decals from the ones I bought from ebay, they turn out alright as long as I didn't use the mark setter. Even without the setter, they stay on pretty well. While its still difficult for me to move around, i can finagle it to the spot with a cue tip and some water. Though, I still miss the regular bandai water slide decals. Also I tested them with tamiya clear coats and they've stayed intacted. So far so good.
-Another Update-
I gave up on the ones I bought from ebay. They are really too hard for me to put into place especially once you transfer it from the decal sheet into the place you need, they pretty much stay there. I tested it with a surface that is really glossy and it was the same.
HOWEVER, I did find a nice little bonus one night while being bored. These TatsuHobby decals that i bought glows pretty bright under black light. It was a nice find and I will post them up with the pictures of my MG Unicorn. So that made my purchase from TatsuHobby worth it! Ebay ones, not so much. Again I wouldn't recommend buying them from there unless you have already and you're okay with them.
Since then I have bought two decals one from TatsuHobby that is a 3rd party decal.
Another, in Ebay from china, which is the picture you see to the side.
Now i applied the decals from TatsuHobby and they turn out pretty fine. Just like the Bandai decals they are pretty thick and easy enough to apply. You can move them around easily in to place. The only down side to them is that they do not stick as well as Bandai decals.
Now, for the more serious matters, the ones I bought from Ebay. They are thin and for me are very difficult to apply. Usually you'd be able to move the decal around once you slide them from the sheet to wherever you are applying them. However, with the ones I bought from China, they tend to stick more, and are very difficult to move around since they are super thin. I am currently in the process of trying to make them work, but I am horrible at these kinds of things. Little patience kind of issues for me. Also, i use the Mr. Mark Setter for applying decals and after applying one, it seemed to have melted the decals slightly. I hope that it is just me getting used to these decals that aren't on par with the Bandai or Tatsuhobby-3rd Party decals. So far I really wouldn't recommend buying these decals, but it was what I expected buying something from China.
If anyone has any suggestions please leave a comment! Or if anyone knows any place left to get the actual Bandai brand decal for the MG Unicorn, because I'd rather use those.
-Update-
So after messing around with a few more decals from the ones I bought from ebay, they turn out alright as long as I didn't use the mark setter. Even without the setter, they stay on pretty well. While its still difficult for me to move around, i can finagle it to the spot with a cue tip and some water. Though, I still miss the regular bandai water slide decals. Also I tested them with tamiya clear coats and they've stayed intacted. So far so good.
-Another Update-
I gave up on the ones I bought from ebay. They are really too hard for me to put into place especially once you transfer it from the decal sheet into the place you need, they pretty much stay there. I tested it with a surface that is really glossy and it was the same.
HOWEVER, I did find a nice little bonus one night while being bored. These TatsuHobby decals that i bought glows pretty bright under black light. It was a nice find and I will post them up with the pictures of my MG Unicorn. So that made my purchase from TatsuHobby worth it! Ebay ones, not so much. Again I wouldn't recommend buying them from there unless you have already and you're okay with them.
Posted by
ju_ustin
0
comments
More after the Jump!
4/27/2012
Project Double R - Gundam Raisel + 0 Raiser
By tstca92q.Project Double R - Gundam Raisel + 0 Raiser
A 1/144 Scale, now when will they make at the 1/100 scale of Raisel? Props to this guy for literally everything to having to put up with that much add on parts to a kit. I am wondering how it stands up right like that. I can imagine how a 1/100 scale would be. Ahhh.....
Posted by
ju_ustin
0
comments
More after the Jump!
Double Bullet in Wolf's Colors!
Modeled by saiyan59. I was waiting for someone to make an effect parts for the shoulder sabers, but he made it all white too! Ahh love the paint job and the shading.Twin Hyper DODs Rifle? Can it destroy entire colonies too? XD
Posted by
ju_ustin
0
comments
More after the Jump!
Any Macross fans out there?
Hat Tip Mecha Guy - 30th Anniversary Macross Exhibition - 1/1 Scale VF-25 Valkyrie."30th Anniversary Macross Exhibition ~ Valkyrie de sasotte!This special exhibition will be held @ SunShine City, Ikebukuro (Apr. 28th - May 6th, 2012), and will feature a 1:1 scale VF-25 Valkyrie."
While I have not seen a lot of macross, I cant pass by any life sized scale of a mecha. Has anyone ever play Another Century games? If you have a PS2 or a fast enough pc to run an emulator, try the 2nd and 3rd games. Most popular mecha is there!
Posted by
ju_ustin
0
comments
More after the Jump!
GM Custom
This marks the last custom kits I found this morning on Modelers-G!
A MG 1/100 Custom GM, again it tend to like most of the Non-Gundam mobile suits a lot, and when I come across somethign as well painted and built as this one, I just need to post it!
Is that the MK II's feet? Hey if you know the parts this guy used, feel free to comment!
A MG 1/100 Custom GM, again it tend to like most of the Non-Gundam mobile suits a lot, and when I come across somethign as well painted and built as this one, I just need to post it!
Is that the MK II's feet? Hey if you know the parts this guy used, feel free to comment!
Posted by
ju_ustin
0
comments
More after the Jump!
Super Jesta!
More custom kits from Modelers-G
I am am a big Jesta fan. Any custom kits of the Jesta gets a thumbs up from me!
Especially when you put fin funnels on it.
I am am a big Jesta fan. Any custom kits of the Jesta gets a thumbs up from me!Especially when you put fin funnels on it.
Posted by
ju_ustin
0
comments
More after the Jump!
Subscribe to:
Posts (Atom)
Powered by Blogger.











